Ductless exhaust hoods contain an integral blower and filter stacks, carbon for vapors, HEPA/ULPA for particles, that allow indoor release of exhaust air. Use when ducting to a remote blower or in-house exhaust system is not practical and fumes are annoyances, not health threats; not intended for use with biohazards.
Ducted fume hoods safely remove vapors from the work area through connection to a remote blower or HVAC system. Noxious or dangerous chemicals are vented outside of the room.
LED and fluorescent models available, in 4' x 2' ceiling-mount panels or LED strips for mounting on ceiling T-bars
Lead-lined hoods with one-piece stainless steel liner to effectively contain radiochemicals. RADIOSAFE Series hoods provide ISO class 5 airflow.
Turnkey solution for contamination-free amplification of nucleic acids. Portable, benchtop hoods supply HEPA filtered air to maintain an ISO 5 environment. Safe UV disinfection module sterilizes work area.
USP 800-compliant, Class I containment enclosure for non-sterile compounding of hazardous drugs. To comply with USP 800 standards, the unit must be operated within an ISO 8 cleanroom.
Opaque (white) polypropylene resists most acids and alkalies
More economical than stainless steel; offers excellent corrosion and chemical resistance.
Durable, resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.
The non-porous surface of glass is easy to clean and resists most detergents, but electrostatic charges may accumulate on its surface
Epoxy Resin; tested resistance to: damage from common organic compounds and volatile/non-volatile chemicals, bacteria and fungus; Heat deflection up to 325°F (167.2°C); Self-extinguishing surface; Non-absorbent and corrosion resistant; Non-reactive and low-sheen uniform finish
FreeZone Freeze Dry Systems by Labconco with a corrosion resistant PTFE-coated collector coil have a brushed stainless steel and glacier white, powder-coated steel exterior.
Fiber glass is strong, long-lasting, non-conductive, radio frequency transparent, and it also absorbs sound waves.
Powder Coated Steel
Powder-coated steel vessels are more economical than stainless steel and offer excellent corrosion resistance. However, they demsontrate higher evaporation rates, making them less suitable for extended storage.
Cost-efficient coated steel incubator chamber is durable, scratch and chip resistant and easy-to-clean.
Toggle between A2 and B2 configurations. Protects personnel, product and lab environment by maintaining complete containment in event of exhaust system failure. For Biosafety Level (BSL) 1, 2, and 3 containment or BSL 4 with PPE
Class II B2
Protects users, products and environments from hazardous agents that require Biosafety Level 1, 2 or 3 containment. Dedicated exhaust system and remote blower discharge 100% of filtered exhaust air. Suitable for use with hazardous chemicals and fumes.
Class II A2
Designated for use with BSL Class I and II organisms, such as E.coli. 70% of air is recirculated within the hood, 30% of the air is exhausted through a HEPA filter.
Narrow-neck glasswares such as flasks require a lab washer with spindles. FlaskScrubber Washers by Labconco feature spindles and a patented vacuum drying system that ensures flasks are completely dry.
Freestanding, undercounter and ADA compliant labware washers are designed for use with beakers and other wide-mouth general purpose lab glasswares. Labconco SteamScrubber and FlaskScrubbers are versatile units with an array of accessories to accommodate various glassware heights.
Pipette washers inject water and detergent into a stainless steel compartment while compressed air creates a percolating action for thorough cleaning of pipettes. Water efficient models such as the ScrubAir Pipette Washer/Dryers by Labconco are programmable with a built-in heater.