Terra Part # 3652-02A
Usually ships in 17-23 business days

Want it faster ? Read about FasTrak

Accessories related to Terra Part # 3652-02A
Biosafety Cabinet; Purifier Axiom, Class II C1, 48" W, UV Lamp, Sash Opening: 8", Labconco, 110/115 V

• ADA compliant 4’ Purifier Axiom C1 BSC with OmniFlex Type A2 and B2 modes

• For Biosafety Level (BSL) 1, 2, and 3 containment or BSL 4 with PPE

• Intuitive MyLogic Operating System shows clear status information on LCD display

• Chem-Zone work surface provides operator safety when working with hazardous vapors

Included built-in options: UV light, Vacu-Pass portal and service fixtures

Exhaust Volume for 8” sash height: 387 CFM @ 0.15" w.g

• Nominal inflow velocity of 105 feet per minute (fpm) (0.53 m/sec)

• Nominal downflow velocity: 65 fpm (0.33 m/sec) for 4' models; 55 fpm (0.28 m/sec) for 6' models

• Maximum sash opening height: 22.6" (58 cm)

• Viewing height: 27.0" (69 cm)

Conformance: NSF/ANSI Standard 49 Listed; ADA-compliant operation UL Standard 61010-1; ISO 5 conditions per ISO 14644-1 and 2; CAN/CSA 22.2 No. 61010-1; CE Conformity Marking (230V models)

• Type A mode for routine microbiological applications and cell culture work

• Type B mode for handling hazardous chemicals

• Filters hazardous aerosols and particulates for personnel, product and environmental protection

• Included connection discharges HEPA filtered exhaust air directly back to the lab

Sash design: 10° angled fully-closing, 1/4" tempered safety glass sash with counterbalanced, anti-racking and easy-to-lift mechanism

• Material: 304 stainless steel work surface, leak-tight stainless steel interior, powder-coated steel exterior, safety glass sash, NSF-Approved, powder-coated steel non-welded (base stand)

Exclusive Labconco features of Purifier Axiom C1 BSC:

• Omni-Flex™ two mode design for Type A and Type B modes

• MyLogic™ Operating System

• LCD information system: Smart-Start™, Night-Smart™, Filter Life Remaining” bar graph for each HEPA filter, status line alarm and alerts when filter life diminishes to 20% and 0%

• Chem-Zone™ work surface with a dedicated direct exhaust for use with hazardous vapors or radionuclides

• Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters option available)

• Dual Electronically Commutated Motors (ECM)

• Constant Airflow Profile™ (CAP) Technology airflow monitoring system

• Active Protection Protocol prevents flow of air into the lab by operating exhaust blowers for up to five minutes, in the event of exhaust system failure

• Enhanced containment with Air-Wave™ Entry System and Contain-Air™ Negative Pressure Channel

• Two electrical duplex receptacles and touchpad positioned on right side

• Reserve-Air™ Secondary Airflow Slots* on curved waterfall design stainless steel inlet grille

• Removable 3-piece work surface (304 stainless steel)

Additional benefits: Low static pressure and volumetric rate exhaust requirements in Type B mode (no need for dedicated exhaust system), safe negative pressure design, glare-free LED lighting (located outside contaminated work area), bright 0-150 footcandle, Interval/elapsed timer for experiment monitoring, electronic security lock with access code(optional activation),


• NSF-Approved, powder-coated steel non-welded telescoping base stand with feet (unassembled)

Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s) and Vacu-Pass™ Cord & Cable Portal

• Type B mode: 10" diameter stainless steel manual damper

• Bag-In/Bag-Out Package: Exhaust Filter for use with radionuclides or harmful chemicals

Biosafety Class: Class II C1

Model: Purifier Axiom

Manufactured by: Labconco

Width: 48"

Sash Opening: 8"

UV Lamp: Included

Base Stand: Optional

Manufacturer SKU: 304481001

Unit of Measure: EA

Marks & Listings: UL, NSF 49

Electrical Specifications: 110/115 V, 16 A, 343 W, 50/60 Hz

Weight, Product: 636 lb

Dimensions, Product: 54.3" W x 32.7" D x 64.2" H

Weight, Shipping: 750 lb

Dimensions, Shipping: 72" W x 44" D x 79.2" H

Package Type: Skeletal Crating

Features and Benefits

ADA-Compliant Touchpad Controls

The touchpad controls, mounted on the right-hand side of the hood, allow operators to manually toggle the blowers, lights, and power receptacles.

Inclined, Ergonomic Inlet Grille

The curved inlet grille provides comfortable support for the operator’s forearms while working within the hood. The airflow inlet pattern is designed to compensate for any airflow restrictions caused by the operator blocking the slots.

Hidden Power Receptacle

The cover to the electrical outlet is flush with the hood’s interior surface for easy cleaning. The hinges are dampened so that the cover closes gently when released.

Omni-Flex™ (Convertible Exhaust) Design

Converting between Type A and Type B operation is simple. Connect ductwork and install the plate on the left side of the exhaust collar (as shown) for Type B exhaust. Remove the ductwork and install the plate on the right side for Type A.

Directly Exhausted Work Zone

Chem-Zone directly exhausts hazardous vapors and chemicals via a dedicated HEPA filter, and dished work surface contains spills

Popular Accessories

For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Telescoping Base Stand with Fixed Feet
    Tubular, epoxy-coated steel frame base stands are adjustable to eight height positions in 1” increments from 27.5" to 34.5”; used with Labconco BSCs, hoods and enclosures
  • Hydraulic Lift Base Stand
    Electric height adjustment from 25.5" to 33.5” ideal for operators of varying heights and wheelchair-bound users; compatible with Labconco BSCs, hoods and enclosures
  • Remote Blower
    Labconco offers energy-efficient remote blowers with an ECM motor that handle airflow from 250 CFM to 3200 CFM satisfying various exhaust requirements
  • UV Sterilization Lamp
    Germicidal UV lamps keep clean the interior of Labconco biosafety cabinets, hoods and benches by breaking up chemical bonds and denaturing RNA and DNA
  • Vacu-Pass™ Cord & Cable Port Kit
    NSF-approved port for power cords and vacuum tubing for use with Labconco biosafety cabinets and hoods; 4 closed-cell neoprene plugs for 1/8, 1/4, 3/8 or 1/2 inch cords or cables
  • Service Fixture Kit
    Available service fixture with a serrated hose tip valve, ball valve, a control handle and instructions for plumbing to services; compatible with Labconco Axiom BSCs and Purifier Logic Hoods

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

You need at least 2 products to compare Compare Clear All
Compare Products