3652-01A
Terra Part # 3652-01A
$14,367
Usually ships in 17-23 business days

Want it faster ? Read about FasTrak

Accessories related to Terra Part # 3652-01A
78554
Biosafety Cabinet; Purifier Axiom, Class II C1, 48" W, Base Stand, Sash Opening: 8", Labconco, 110/115 V
Product Details
  • ADA compliant 4’ Purifier Axiom C1 BSC with base stand and OmniFlex dual Type A2 and B2 modes
  • For Biosafety Level (BSL)1, 2, and 3 containment or BSL 4 with PPE
  • Intuitive MyLogic Operating System shows clear status information on LCD display
  • Chem-Zone work surface provides operator safety when working with hazardous vapors
  • Includes base stand
  • Exhaust Volume for 8" sash height: 387 CFM @ 0.15" w.g
  • Nominal inflow velocity of 105 feet per minute (fpm) (0.53 m/sec)
  • Nominal downflow velocity: 65 fpm (0.33 m/sec) for 4' models; 55 fpm (0.28 m/sec) for 6' models
  • Maximum sash opening height: 22.6" (58 cm)
  • Viewing height: 27.0" (69 cm)
  • Conformance: NSF/ANSI Standard 49 Listed; ADA-compliant operation UL Standard 61010-1; ISO 5 conditions per ISO 14644-1 and 2; CAN/CSA 22.2 No. 61010-1; CE Conformity Marking (230V models)
  • Type A mode for routine microbiological applications and cell culture work
  • Type B mode for handling hazardous chemicals
  • Filters hazardous aerosols and particulates for personnel, product and environmental protection
  • Included connection discharges HEPA filtered exhaust air directly back to the lab
  • Sash design: 10° angled fully-closing, 1/4" tempered safety glass sash with counterbalanced, anti-racking and easy-to-lift mechanism
  • Material: 304 stainless steel work surface, leak-tight  stainless steel interior, powder-coated steel exterior, safety glass sash, NSF-Approved, powder-coated steel non-welded (base stand)
  • Exclusive Labconco features of Purifier Axiom C1 BSC:
  • Omni-Flex™ two mode design for Type A and Type B modes
  • MyLogic™ Operating System
  • LCD information system: Smart-Start™, Night-Smart™, Filter Life Remaining" bar graph for each HEPA filter, status line alarm and alerts when filter life diminishes to 20% and 0%
  • Chem-Zone™ work surface with a dedicated direct exhaust for use with hazardous vapors or radionuclides
  • Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters option available)
  • Dual Electronically Commutated Motors (ECM)
  • Constant Airflow Profile™ (CAP) Technology airflow monitoring system
  • Active Protection Protocol prevents flow of air into the lab by operating exhaust blowers for up to five minutes, in the event of exhaust system failure
  • Enhanced containment with Air-Wave™ Entry System and Contain-Air™ Negative Pressure Channel
  • Two electrical duplex receptacles and touchpad positioned on right side
  • Reserve-Air™ Secondary Airflow Slots* on curved waterfall design stainless steel inlet grille
  • Removable 3-piece work surface (304 stainless steel)
  • Additional benefits: Low static pressure and volumetric rate exhaust requirements in Type B mode (no need for dedicated exhaust system), safe negative pressure design, glare-free LED lighting (located outside contaminated work area), bright 0-150 footcandle, Interval/elapsed timer for experiment monitoring, electronic security lock with access code(optional activation),
  • Options:
  • NSF-Approved, powder-coated steel non-welded telescoping base stand with feet (unassembled)
  • Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s) and Vacu-Pass™ Cord & Cable Portal
  • Type B mode: 10" diameter stainless steel manual damper
  • Bag-In/Bag-Out Package: Exhaust Filter for use with radionuclides or harmful chemicals

Model: Purifier Axiom

Width: 48"

Biosafety Class: Class II C1

UV Lamp: Optional

Base Stand: Included

Manufactured by: Labconco

Sash Opening: 8"

Manufacturer SKU: 304480101

Unit of Measure: EA

Marks & Listings: UL, NSF 49

Electrical Specifications: 110/115 V, 16 A, 343 W, 50/60 Hz

Weight, Product: 636 lb

Dimensions, Product: 54.3" W x 32.7" D x 64.2" H

Weight, Shipping: 835 lb

Dimensions, Shipping: 72" W x 44" D x 79.2" H

Package Type: Skeletal Crating

Buy Accessories
  1. Converts Telescoping Base Stands with Fixed Feet to mobile stands  |  3642-36 displayed
    $450
    Increase Down Increase Up
  2. Secures Telescoping Base Stand to floor  |  3642-37 displayed
    $292
    Increase Down Increase Up
  3. Shown: Vacupass installed in the interior wall of a Labconco BSC  |  3651-63 displayed
    $208
    Increase Down Increase Up
  4. Contains cords and keeps them away from work area  |  3647-39 displayed
    Cord Management System; for Labconco Biosafety Cabinets Ships Free Free shipping in contiguous USA
    $126
    Increase Down Increase Up
  5. Sash-Glider Kit
    $174
    Increase Down Increase Up
  6. Clean both sides of a biosafety cabinet sash while it is closed to avoid contamination risk.  |  3645-77 displayed
    $103
    Increase Down Increase Up
  7. Can be mounted on left or right side interior  |  3642-56 displayed
    $125
    Increase Down Increase Up
  8. For use with Class II, Type A2 and B2 Biosafety Cabinets  |  3647-40 displayed
    Lamp; UV, 254 nm, for Purifier Logic +, 115V Ships Free Free shipping in contiguous USA
    $255
    Increase Down Increase Up
  9. For use with Class II, Type A2 and B2 Biosafety Cabinets  |  3647-40 displayed
    $255
    Increase Down Increase Up
  10. Bar supports intravenous solution bottles and bags  |  3647-35 displayed
    IV Bar; 4', for Purifier Logic+ Biosafety Cabinet Ships Free Free shipping in contiguous USA
    $160
    Increase Down Increase Up
  11. Meets demanding daily ventilation requirements of various hood types  |  3645-52 displayed
    $1,991
    Increase Down Increase Up
  12. Extended Product Warranty
    Request Quote
    Increase Down Increase Up

Features and Benefits

Products Tailored to Your Cleanroom Environment

Provide Terra with your desired ISO Grade™ design. We will tailor the product to meet your criteria and certify it with a report appended to your invoice. Certificate includes all the necessary information to streamline audits and facility compliance.
Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Telescoping Base Stand with Fixed Feet

    Tubular, epoxy-coated steel frame base stands are adjustable to eight height positions in 1” increments from 27.5" to 34.5”; used with Labconco BSCs, hoods and enclosures
  • Hydraulic Lift Base Stand

    Electric height adjustment from 25.5" to 33.5” ideal for operators of varying heights and wheelchair-bound users; compatible with Labconco BSCs, hoods and enclosures
  • Remote Blower

    Labconco offers energy-efficient remote blowers with an ECM motor that handle airflow from 250 CFM to 3200 CFM satisfying various exhaust requirements
  • UV Sterilization Lamp

    Germicidal UV lamps keep clean the interior of Labconco biosafety cabinets, hoods and benches by breaking up chemical bonds and denaturing RNA and DNA
  • Vacu-Pass™ Cord & Cable Port Kit

    NSF-approved port for power cords and vacuum tubing for use with Labconco biosafety cabinets and hoods; 4 closed-cell neoprene plugs for 1/8, 1/4, 3/8 or 1/2 inch cords or cables
  • Service Fixture Kit

    Available service fixture with a serrated hose tip valve, ball valve, a control handle and instructions for plumbing to services; compatible with Labconco Axiom BSCs and Purifier Logic Hoods

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.