JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home
Modal Blocks Demo - Ken's Data

Modal Demo

Click here to open modal "HDS-9 Protector Stainless Steel Radioisotope Laboratory Fume Hoods"

Click here to open modal "NCD-HDS-12-Valuline Horizontal Laminar Flow Workstations"

Click here to open modal "NCD-HDS-34-Labconco Protector XStream Laboratory Fume Hoods"

Click here to open modal "NCD-HDS-38-Labconco RXPert Double Filtered Balance Enclosure"

Click here to open modal "NCD-HDS-41 Labconco Purifier Logic Class II B2 Biological Safety"

Click here to open modal "REF-75 Value Lab Upright Freezer"

Click here to open modal "REF-100 Hazardous Location Refrigerator by Marvel Scientific"

Protector Stainless Steel Radioisotope Laboratory Fume Hoods: More Information

Seamless 304 stainless steel baffle and liner
By-pass air flow and by-pass block
Clean-Sweep™ sash handle and tracks, Eco-Foil™ air foil and Cord-Keeper™ slots
37.5" obstruction free sightline
Performance tested to ASHRAE 110-1995
Required Accessories: Remote Blowers, Base Cabinets, Ductwork (See Available Accessories Below)
One-Year Manufacturer Warranty for Parts and Labor from date of Installation or Two-Year Warranty from Date of Shipment

Specifications

Material	Corrosion-resistant 304 stainless steel interior; glacier white, dry powder epoxy-coated steel exterior; black enamel-coated hardboard surface; tempered safety glass vertical-rising sash with frame of epoxy-coated aluminum and PVC
Electrical	115 volts, 50/60 Hz, 10 amps
Conformance and Listings	Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL Listings: ETL-listed certified to UL 61010-1, UL 1805 and CAN/CSA C22.2 No. 61010.1 ASHRAE 110-1995 Performance tested
Type	Benchtop
Required Remote Blower	Not included (sold separately)
Required Accessories	Remote Blowers, Base Cabinets, Ductwork
Optional Accessories	Airflow Monitors, Sash Stops, Rear Finish Panel Kits, Three-Sided Ceiling Enclosure Kits
Airflow	By-pass airflow for stable face velocities By-pass block controls and reduces minimum air volume demanded by obstructing the by-pass opening above the sash Eco-Foil air foil saves energy by 7-10% compared to flat air foil; curved air foil maximizes containment by sweeping work surface with air Clean-Sweep sash handle and tracks bleeds air into hood chamber and away from breathing zone of operator; saves energy by 7-10% compared to flat air foils
Construction	Corrosion-resistant 304 stainless steel baffle and liner Tempered safety glass sash Seamless interior with coved corners Removable front and side panels for easy lamp replacement and access to plumbing and electrical connections 37.5" sightline provides unobstructed view from work surface to header panel; ideal for taller operators Cord-Keeper slot on left and right side of air foil keeps electrical cords away from operator and allows for complete sash closure when cords are plugged into receptacles on corner posts Access to plumbing from front of hood through service access panels Pre-wired electrical components: factory wired fluorescent lights and switches at single point junction; each hood factory prepared for up to 4 electrical duplexes and an airflow monitor; models with one electrical duplex with right side receptacle; 8 ft. models with one duplex with receptacles mounted on each side Hardboard surface supports integral work surface 11" OD Type 304 stainless steel exhaust connection(s) Remote control optional color-coded service fixtures for gas, air water, vacuum and other services; can be used regardless of sash position; select models have two pre-plumbed service fixtures; each corner post factory prepared for up to 4 service fixtures (8 fixtures per hood). Talk to a Terra product specialist about additional service fixtures
Lighting	Two high-efficiency T8 fluorescent lights outside hood interior for easy replacement and corrosion protection

Labconco RXPert Double Filtered Balance Enclosure

Nominal Width (A)	2 ft.	3 ft.	4 ft.
Weight	269 lbs. (116 kg)	327 lbs. (151 kg)	401 lbs. (186 kg)
Dimensions (W x D x H)	24.0" x 29.0" x 49.5" (609.6 x 736.6 x 1257 mm)	36.0" x 29.0" x 49.5" (914.4 x 736.6 x 1257 mm)	48.0" x 29.0" x 49.5" (1219.2 x 736.6 x 1257 mm)
Electrical	115V, 60Hz	115V, 60Hz	115V, 60Hz
Lighting	Fluorescent	Fluorescent	Fluorescent
Filter System	HEPA (bag-in/bag-out)	HEPA (bag-in/bag-out)	HEPA (bag-in/bag-out)
Sash Opening (B)	21.6" (54.9 cm)	33.6" (85.3 cm)	45.6" (115.8 cm)
Conformance	ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010	ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010	ANSI Z9.5, CAN/CSA C22.2, Modified ASHRAE 110, SEFA 1, UL 61010
Warranty	2 years from date of shipment or 1 year from date of installation	2 years from date of shipment or 1 year from date of installation	2 years from date of shipment or 1 year from date of installation

Noise Levels and Exhaust at Varying Face Velocities
Nominal Width	100 FPM Face Velocity		80 FPM Face Velocity		60 FPM Face Velocity
Nominal Width	Exhaust (CFM)	db(A)	Exhaust (CFM)	db(A)	Exhaust (CFM)	db(A)
2 ft.	145	53-58	145	53-58	145	53-58
3 ft.	220	58-61	220	58-61	220	58-61
4 ft.	295	62-66	295	62-66	295	62-66

Labconco Purifier Logic+ Class II B2 Biological Safety Cabinets

Specifications
Unit Dimensions	4': 54.3"w x 31.2"d x 72.6"h (1379.22 x 792.48 x 1844.04 mm) 6': 78.3"w x 31.2"d x 100.1-106.1"h (1988.82 x 792.48 x 2542.54-2694.94 mm)
Material	Stainless steel inlet grille with Reserve-Air™ Secondary Airflow Slots*; removable, seamless type 304 stainless steel, dished work surface with lift out knobs; powder-coated steel exterior
Electrical	115 volts, 60 Hz, 12 amps, Domestic 230 volts, 50/60 Hz, 8 amps, North America
Nominal Width	4' and 6' models
Sash Opening	8'
Exhaust Volume	665 CFM (4' models) 998 CFM (6' models)
Lighting	Fluorescent
Air Circulation	O%
Noise level	< 63 dBA
Heat Load	990 BTU/hour (4' models)
Inflow/Downflow Velocity	105 feet per minute (fpm) (0.5 m/sec)/ 55 fpm (0.3 m/sec)
Includes	10' (3 m) power cord with plug
Compliance	NSF International and ETL Listed; meets Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100)

Value Lab Upright Freezer by Thermo Fisher Scientific: More Information

Part Number	20LFEETSA
External Dimensions (w x d x h)	30.5 x 34 x 73.13 in. (775 x 864 x 1861mm)
Weight	200 lbs. (90.7 kg)
Electrical	120 volts, 60Hz
Internal Dimensions	23.75 x 27.75 x 57.75 in. (603 x 705 x 1467mm)
Capacity	20.9 Cubic Feet /591.82L
Exterior Finish	Epoxy Coated Steel
Color	White
Freezer Temperature	-12 to -20°C
Shelves	4 Fixed Shelves, 6 Fixed Door Shelves
Shipping Weight	230 lbs. (104.3 kg)
Defrost Mode	Manual
Temperature Control	Digital
Refrigerant	R134A
Certificates	cULus
Warranty	13 Months parts and labor

Specifications and Additional Features of Marvel Scientific Hazardous Local Refrigerator: More Information

Listed in Underwriters Laboratories for Class 1, Group C and D applications
Wiring complies with National Electrical Code, Article 501-4 for Class 1, Division 1 and 2
"U" shaped, plate-type evaporator located on top of side and rear of interior wall
Requires additional ventilation when installed under lab benches or within casework
Static condenser mounted to the back of the cabinet, free of electric condenser fan motor helps prevent accidental ignition of flammable vapors
Auto cycle defrost eliminates manual defrost
“Box Style” door
Right hinge with door lock
Discrete top edge mounted door handle
4 leveling legs for easy height adjustment
2 wire pig-tail for hardwire connection
Durable white powder coat paint finish standard
Built-in door lock available for secure storage
Clearance: 1" (25 mm) clearance from top and sides and 1 1/2" (38 mmm) from back for proper condenser ventilation when recessed

Compare Revco Blood Bank Refrigerator Models for Small and Large Lab Environments

Temp. Range	33° to 45° F/1° to 7° C
Volume	6.1 cubic feet (0.17 mm), 173 liters
Exterior Dimensions: H x W x D in inches (mm in parentheses)	23.875 x 26 x 34 (606 x 660 x 864)
Interior Dimensions: H x W x D in inches (mm in parentheses)	21 x 20 ¾ x 28 (533 x 527 x 711)
Shipping Weight/Plug	120 lbs./55 kg; 130 lbs./59 kg with skid

Terra Universal (714) 578-6016

Information & Resources

About Us