Product Details
- Available ISO Ratings: ISO 5, ISO 6, ISO 7, ISO 8
- Energy efficient Smart FFU with integrated UPS battery system arrives fully assembled, ready for use
- High-capacity, durable, ISO-compliant system rated for thousands of operating hours
- Handy and convenient Uninterruptible Power Supply (UPS) provides power when and where you need it, battery system provides approx. 1-2 hr runtime depending on FFU speed setting
- EC motor offers high performance, low energy consumption, and low noise levels (40 dB)
- Suitable for mobile transport or applications that require protection from unexpected power outages
- Ships in 120V configuration. Can be easily be reconfigured to 230V
- Uninterruptible Power Supply (UPS) battery system:
- UPS systems provide a backup battery-power supply that keeps critical equipment running without interruption when utility power supply is unavailable.
- UPS System includes main UPS and add-on external rechargeable battery pack for longer runtimes.
- Fully assembled plug-and-play design speeds up installation. No time-consuming connection of internal batteries by user required.
- Intelligent battery management system extends battery life.
- Estimated Runtimes:
- 180W Load: 123 minutes.
- 350W Load (max speed): 55 minutes.
- NOTE: All estimates based on new, fully charged batteries under typical office environmental conditions.
- Front panel LEDs alert you to a variety of performance conditions, including AC line present, automatic voltage regulation, UPS load level and replace battery.
- External battery can be "hot-swapped" (safely removed or swapped without shutting down the UPS).
- For Power Outages: UPS Protects against all types of power problems including blackouts, brownouts, surges and line noise. In the event of a power outage, the UPS immediately activates without interruption. The UPS keeps your FFU running long enough to either: (1) safely store away contamination-sensitive materials and works-in-progress before shutting down operations, or (2) switch to a back-up power generator.
- For Mobile Applications: Use the UPS to create a mobile battery-powered cleanroom on wheels to safely transport sterile materials through a dirty space. The UPS provides adequate time to transfer out of one cleanroom and relocate to another cleanroom in a different part of the facility. With the FFU mounted on top of the cabinet, the battery-powered system supplies uniform HEPA-filtered air flow to prevent airborne contamination while moving the cabinet through a dirty environment. Once the cart arrives at its destination, simply plug the system back into a wall outlet to recharge the batteries.
- Smart® EC FFU:
- High Efficiency Particulate Air (HEPA) Filter: 99.99% efficient at 0.3µm particle diameter.
- Electronically commutated (EC) brushless motor with internal microprocessor. EC motor offers high performance, low energy consumption and low noise levels (40 dB).
- MODBUS® networking control card with closed-loop control capability supports air pressure, air flow, and particle count sensors.
- Motor control panel includes diagnostic indicator lights, manual speed adjustment, test probe jacks, CAT5e ports, control mode switch, and MODBUS® address DIP switch bank.
- FDA-approved silicone sealant minimizes leaks for improved efficiency. It is also food-grade and resistant to a wide variety of chemicals and environments for a long service life.
- Internal baffling plate and diffuser panel provide quiet uniform air flow across the filter face.
- Filters are leak tested in accordance with IEST standards and meet UL 900.
- Includes MERV 7 pre-filter to extend service life of HEPA filter.
- See performance data and submittal sheets for additional information.
- Optional Accessories: challenge port kit, power plug adapter, replacement filter, filter replacement alarm, ionizing bar, pre-filter safety cover for CE conformance.
- All filter sales are final; returns for this item cannot be accepted.
Specs
• Type: Smart® ECM
• Material: Powder-Coated Steel
• Filter Replacement Access: Top Side
• Size: 2'x4'
• Filter Frame Material: Aluminum
• Filter: HEPA
• Motor Type: Electronically Commutated (EC)
• Motor HP: 1/3 hp
• Airflow: Positive Pressure
• Speed Control: Variable Speed Control Card
• Blower Type: Forward Curved
• Active Filter Face Area: 7.1 ft²
• Pre-Filter: MERV 7
• Unit of Measure: EA
• Marks & Listings: CE, UL, ULC
• Electrical Specifications: 120/230 V, 4.128 A, 1 Ph, 50/60 Hz
• Weight, Product: 130 lb
• Dimensions, Product: 23.63" W x 47.63" D x 16.5" H
• Weight, Shipping: 170 lb
• Dimensions, Shipping: 51" W x 25" D x 20" H
• Package Type: Palletized
