Product Details
- Available ISO Ratings: ISO 5, ISO 6, ISO 7, ISO 8
- Smart® gas-purge glove box automates low-humidity control down to 0% RH
- Ideal for moisture-sensitive materials: microelectronics, medical devices, pharmaceutical powders
- Gas control system auto-adjusts nitrogen purge to maintain sub-ambient humidity set point
- Fast-acting and economical; maintains below 10% RH with 78% less nitrogen than manual flow meter
- Fully integrated turnkey system takes only a few minutes to install and program
- Smart® controlled atmosphere glove box isolator features automated RH control that toggles nitrogen inflow (binary on/off) for fast setpoint response.
- Mini LED display and built-in RH sensor simplifies installation. Operation requires only one gas line, one low voltage power connection, and a pair of gloves.
- CHAMBER DESIGN:
- Durable stainless steel construction is suitable for heavy-duty, sterile, and ESD-safe applications.
- 304 or 316-grade stainless steel contains more nickel and molybdenum than 304 or 316-grade stainless steel, enhancing its corrosion resistance in wet environments and degradation from bleach-based disinfectants.
- CleanSeam™ design features fully-welded single piece enclosure with seamless interiors to eliminate hard-to-clean cracks and crevices that can harbor contaminants. The continuous-seam welds are ground smooth to simplify cleaning and sterilization.
- Access doors mounted on left and right side feature stainless steel frames and hardware to increase structural rigidity for a longer service life.
- Santoprene® “e”-shape non-outgassing rubber gasket installed to door frames firmly compresses for a tighter seal. Resilient rubber maintains its shape after compression and won't flatten, warp, crack, or degrade like ordinary foam gasket. Gasket is also mechanically attached to the door frame to avoid adhesive failure common with gasket tapes.
- Two round ABS plastic glove ports provide a wide range of motion, and compatibility with numerous glove types. ABS Plastic offers excellent tensile strength and stiffness. Resists heat, most oils, acids, and alkalis.
- Automatic relief/bleed (RB) valves continuously bleed off excess internal gas in only one direction. Helps maintain a slight positive pressure inside the glove box without allowing contaminants inside.
- External mounted LED illuminator brightens interior for optimal visibility.
- Requires gloves (sold separately): available as one-piece, fully dipped gloves or two-piece glove and sleeve combinations with Glove-Under-Sleeve (GUS) connectors to allow fast, inexpensive glove replacement.
- OPTIONAL ACCESSORIES:
- Inert gas airlock: minimize nitrogen loss and contamination inflow when materials are passed through the glove box. The airlock is connected to an inert gas line to purge out ambient air before the inside door is opened to allow materials to transfer into or out of the main chamber.
- Nitrogen generator: provides a continuous, reliable supply of pure, dry nitrogen to eliminate dependence on bulky canisters.
- ErgoHeight™ automatic height adjusting table: perfect for workstations holding heavy or fragile equipment that require frequent height adjustment.
- NOTE: Glove box is designed for positive-pressure operation and is therefore not tested as a hermetically sealed chamber, and is not designed for containment of hazardous materials.
Specs
• Material Type: Stainless Steel
• Model: Smart® Glovebox, CleanSeam™
• Number of Glove Ports: 2
• Window Material: Static-Dissipative PVC
• Chamber Material: 304 or 316 Stainless Steel
• Chamber Width: 35"
• Chamber Depth: 24"
• Chamber Height: 28"
• Chamber Dimensions: 35" W x 24" D x 28" H
• Maximum Working Height: 28"
• Unit of Measure: EA
• Marks & Listings: CE
• Electrical Specifications: 120/240 V, 0.5 A, 50/60 Hz
• Weight, Product: 110 lb
• Dimensions, Product: 35.125" W x 24.125" D x 28.125" H
• Weight, Shipping: 213 lb
• Dimensions, Shipping: 40.38" W x 29.38" D x 35.5" H
• Package Type: Crate
