Product Details
- Energy-efficient benchtop 6’ Protector ClassMate Lab Hood ideal for classroom and instructional use
- High-performance by-pass hood with baffle and air foil
- Vertical sash stops at 18" from work surface (60% open) and 28" (fully open); modified to 14"
- Requires remote blower, ductwork, work surface and base stand or cabinet
- Includes 1 electrical duplex and 2 service fixtures
- Material: powder-coated steel frame and clear, ¼" thick, tempered safety glass
- Compliance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL 1805, UL 61010
- ETL-Listed
- Lighting: energy-efficient LED vapor-proof lightening
- Sash and panel: 5" angle
- Viewing height: 37.5"; static viewing panel positioned above sash frame
- CFM and static pressure fully open: 1225/0.72" at 100 fpm; 980/0.46" at 80 fpm; 735/0.26" at 60 fpm
- CFM and static pressure 62.5% open: 775/0.29" at 100 fpm; 620/0.19" at 80 fpm; 465/0.10" at 60 fpm
- Fixtures: 2 with forged brass valves, brass tubing for gas and copper tubing for cold water
- Electrical duplex: 1 pre-wired GFCI located on lower right side
- Anti-racking vertical-rising sash with chain drive promotes smooth operation
- High-performance airflow per SEFA 1 definition
- Ergonomic airfoil maximizes containment
- Clean-Sweep openings: provides non-turbulent airstreams creating a protective barrier
- Baffle directs airflow to rear of interior
- ASHRAE 110 performance tested
- Removable front panel for easy access to electrical connections
- Tissue screen below exhaust outlet protects remote blower from debris
- Sash does not extend above fume hood when raised
- Low profile trough (requires no cabinet overhang) located below air foil contains spills
- Easy to clean with pivoting air foils
- Optional accessories: Service Fixture Kits, Electrical Duplex Kits, Guardian Airflow Monitors, Upper Rear Finish Panel Kits, Dual Exhaust Adapter
Specs
• Built-In Blower: No
• Depth: 32.7"
• Hood Design: Benchtop
• Duplex Outlet: Installed
• Frame Material: Powder-Coated Steel
• Height: 60.3"
• Light Fixture: LED
• Manufactured by: Labconco
• Manufacturer SKU: 160604102
• Max Opening: 28" H
• Model: Protector ClassMate
• Side Panels: Tempered Glass
• Sash Design: Manual/Sliding
• Sash Height: 14"
• Service Fixtures: Installed
• Shield Type: Vertical
• Type: Ducted
• Width: 72"
• Work Area Dimensions: 67.5" W x 24.8" D x 48" H
• Special Application: Exhaust Fume
• Unit of Measure: EA
• Dimensions, Product: 72" W x 32.7" D x 60.3" H
• Dimensions, Shipping: 75" W x 35" D x 63" H
• Electrical Specifications: 115 V, 10 A, 1,150 W, 1 Ph, 50/60 Hz
• Marks & Listings: UL
• Weight, Product: 550 lb
• Weight, Shipping: 550 lb
