Learn More: Scrub Air Pipette Washer and Dryer
Additional Features of ScrubAir Pipette Washers/Dryers by Labconco
- Compressed air and water scrubs interior walls while water and detergent cascade down outside walls
- Eco-friendly and saves water by using only 12.5 liters of tap/pure water; adds up to a savings of $2900 or more
- Fast washing and drying power reduces need for pipette inventory
- Feedwater inlet/drain hose, 6.0' (1.8 m), with quick connect hose coupling and two aerator adapters for connection to standard 55/64-27 male or 15/16-27 female lab faucets
- Portable unit can be hooked to a sink faucet; easy to transport when placed on a cart
- MENU button selects and programs wash cycles and diagnostic testing
- SELECT button sets wash, rinse, dry cycle times and number of rinses and for diagnostic testing
- LCD displays cycle segment and remaining time
- Three factory-set cycle programs: STANDARD, USER 1 and USER 2
User-modifiable settings:
- Wash time from 0 – 8 hours in 1 minute increments
- Rinse time for 0 – 4 hours in 1-minute increments
- Total number of rinses from 0 – 10
- Dry time from 0 – 8 hours in 1-minute increments
Requirements
- Tap/pure feedwater with 3/8" OD (minimum) water line
- Recommended minimum fill water temperature: 49° C (120° F)
- Maximum fill water temperature 60° C (140° F)
- Water consumption per fill 0.46 gallon (1.75 liters) to 0.7 gallon (2.5 liters)
- Min./Max. feedwater pressure: 8 psi (55 kPa)/ 120 psi (827 kPa)
- Regulated compressed air with 3/8" OD air line
- Minimum feed airflow/pressure: 5 CFM (142 l/m) 20 psi (138 kPa)
- Maximum feed air pressure: 100 psi (689 kPA)
- Drain plumbing 1.25" (3.2 cm) ID or larger
- Liquid detergent (LabSolutions Liquid Detergent recommended)