Applications and Specifications
Applications for LAMBDA 465 Spectrophotometer
Able to capture a full spectrum of light in 20 seconds, the LAMBDA 465 is designed to provide reliable results in high-end and high-throughput measurements. Features such as the dual light source, photodiode array (PDA) technology and a 1nm resolution make the LAMBDA 465 an ideal spectrophotometer in pharma and other regulated lab environments.Ideal for dissolution, fast kinetics, method development, routing nucleic acid analysis, material science research, pharmaceutical, nutraceutical, biology, sample analysis and processes requiring high-speed scanning and high resolution.
| Source Lamp | Tungsten/Deuterium |
|---|---|
| Monochromator | N/A |
| Detector | Diode Array 1024 Channel |
| Photometric System | Single Beam Array |
| Wavelength Range | 190-1100 nm |
| Spectral Bandwidth | 0.95 nm (Spectral Resolution) |
| Data Interval | N/A |
| Wavelength Accuracy | ± 0.5 nm (Holmium Oxide Solution NIST 2034) ± 0.2 nm (D2 peak, 486.0 nm and 656.1 nm) |
| Wavelength Reproducibility | < 0.02 nm |
| Photometric Range | ± 3 AU |
| Photometric Accuracy | ± 0.005AU @ 440.0, 465.0, 546.1 590.0 and 635 nm, 1.0 AU (Nist 930e) ± 0.01 AU (60 ppm Potassium Dichromate) |
| Photometric Reproducibility | < 0.001 AU @ 0.5 and 1.0 AU < 0.002 AU (60 mg/L Potassium Dichromate) |
| Stray Light | < 1.0% (198 nm KCL) < 0.05% (220 nm Nal) < 0.03% (340 nm NaNO2) |
| Baseline Stability | N/A |
| Baseline Flatness | < 0.0005 AU |
| Photometric Noise | < 0.0001 AU @ 300 nm |
| Photometric Stability | < 0.001 AU/h @ 0 AU, 300 nm |
| Maximum Scan Rate | N/A |
| Maximum Slew Rate | N/A |
| Interface | USB |
| Dimensions | 21.3"W x 17.7"D x 9.1"H (541 x 450 x 232 mm) |
| Electrical | 100-240 V 50/60 Hz |
| Environmental Requirements | Temperature: 5-40°C Humidity: Up to 80% Non-condensing |
