The compact design of the FreeZone® makes it ideal for tight spaces. An upright stainless steel collector coil removes 1 liter of water in 24 hours and holds 1 liter of ice before defrosting is necessary. It features 1/4 hp refrigeration system that reaches a low of -50°C in the collector chamber. An LCD display indicates set up and operating parameters and total number of hours since refrigeration and vacuum were serviced. Other features include a one-button automatic refrigeration and vacuum start up with manual overrides; collector drain hose; power switch; 3" (76 mm) diameter accessory attachment port; rubber feet; 3' (914 mm) of 3/4" (19 mm) ID vacuum hose and 2 clamps.
NOTE: Freeze Dryers without Teflon-Coated Collector Coil & Chamber are NOT recommended for processing samples containing Acetonitrile. For Processing samples with Acetonitrile please see systems with Cascade Refrigeration.
12 W x 17.88 D x 16.65 H
(305W x 454 D x 423 H)
Stainless Steel or Optional Teflon-Coated
230VAC /50hz (CE)
All models are factory wired with a 3-wire cord with 20 amp NEMA plug
Rear-mounted electrical receptacle for connection with vacuum pump (sold separately
9" retractable collector drain hose acceessible from left side for easy disposal of defrosted material
Not recommended for use with acetonitrile, methanol or ethanol
Accessories and Compatible Products:
All Freeze Dryer Systems require but do not include:
Rotary Vane Direct Drive Vacuum Pumps provide a reliable vacuum source for a variety of FreeZone® Freeze Dry Systems.
Chemvac Combination Pumps integrate a high performance rotary vane pump with a chemical-resistant diaphragm pump.
Drying Chamber or Manifold
The 12-Port Drying Chamber provides a convenient means to attach samples to a freeze dry system.
The 4 Port Manifold is ideal for lyophilizing samples in smaller flasks.
Freeze Dry Glassware
Fast-Freeze® Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds.
Labconco Portable Table, features two open shelves that provide easy transfer of equipment from countertop to cart. Additional features: 4" (102 mm) diameter casters, two with toe locks; ready-to-roll, full factory assembly; ergonomic, extruded rubber handle grips; durable glacier white, epoxy-coated 18 gauge welded tubular steel frame; ID tag; supports loads up to 400 lbs. (181.4 kg); lifetime guarantee. These versatile carts and benches have endless uses from transporting equipment and supplies to providing auxiliary bench space.