FREE CONSULTATION714-578-6016
  1. Home
  2. Lyophilizers & Evaporators
  3. Lyophilizers
  4. FreeZone Freeze Dry Systems Accessories

Labconco FreeZone® Freeze Dryer Accessories and Compatible Products

Choose a variety of FreeZone Freeze Dry System Accessories for added flexibility and sample accommodation during lyophilization.

Vacuum Pumps, Combination Pumps, Drying Chambers, Manifolds, Freeze Dry Glassware, Product Shelves and Adapters

Labconco Rptary Vane Pump
Vacuum Pumps
Rotary Vane Direct Drive Vacuum Pumps
Rotary Vane Direct Drive Vacuum Pumps provide a reliable vacuum source for a variety of laboratory products including FreeZone® Freeze Dry Systems, Protector Controlled Atmosphere Glove Boxes and CentriVap Centrifugal Concentrators. General Purpose Pumps are available with displacement capacities of 108, 117, 173 or 195 liters per minute (at 60 Hz). Chemical-Resistant Pumps have a displacement capacity of 173 liters per minute (at 60 Hz).
  • Designed for use with aqueous samples
  • Ultimate vacuum (total pressure) 2 x 10 -3 mBar (1.5 micron)
  • Mode selector with two positions: High Vacuum and High Throughput
  • Gas Ballast with three positions: Closed, Low Flow and High Flow
  • Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of a power failure
Rotary Vane Direct Drive Vacuum Pumps: Compatible with Labconco FreeZone® Freeze Dry Systems:
1 Liter Benchtop, 2.5 Liter Benchtop, 2.5 Liter Console
Labconco # Displacement
Capacity
Electrical Specification Dimensions
W" x D" x H" mm)
Cat. # Price
1472100 117 L/min 115V, 50/60Hz, 4.6 amps, Domestic 6.5 x 17.0 x 10.4
(165 x 432 x 264)
3643-79 $ 3,233
7739402 117 L/min> 230 volts, 50/60 Hz 6.5" x 17.0" x 10.4
(165 x 432 x264)
3643-81 $ 3,395

 


Labconco Combination Pump
Combination Pumps
ChemVac Combination Pumps integrate a high performance rotary vane pump with a chemical-resistant diaphragm pump to create a low maintenance, longer-lasting pump. The diaphragm pump removes the condensable vapors in the rotary vane pump before they can contaminate the oil, thus extending the life of the oil and ultimately the life of the pump. Pump oil lasts up to 10 times longer than in conventional rotary vane pumps under virtually any condition. Long periods between oil changes reduce cost and down time.
  • Designed for use with acids and other chemicals including TFA, TFA by-products, acetonitrile, HBr and HNO3, present in samples such as HPLC-prepared and peptide purified materials
  • Combination pump system consists of a two-stage rotary vane pump and two-stage, chemically-resistant diaphragm pump.
  • A pressure control valve compensates for the different volumes displaced by the two pumps.
  • Ultimate vacuum (partial pressure) <3 x 10-3sup) mBar (2.25 micron)
  • Ready to use and fully charged with vacuum pump oil (approximately 1 liter)
  • .75" OD inlet adapter
  • Includes power switch, power cord and plug.
Combination Pumps: Compatible with Labconco FreeZone® Freeze Dry Systems: 1 Liter Benchtop,
2.5 Liter Benchtop, 2.5 Liter Console
Labconco # Displacement
Capacity
Electrical Specification Dimensions
W" x D" x H" (mm)
Cat. # Price
7584000 110 L/min 115V, 60Hz, 3.2 amps, Domestic 18.9 x 9.0 x 15.0
(480 x 229 x 381)
7906-19 $ 4,022
7584002 110 L/min 230V, 50/60Hz, 1.6 amps, Domestic 18.9 x 9.0 x 15.0
(480 x 229 x 381)
7906-20 $ 3,941

 


Drying Chambers

Labconcom Drying Chamber
12-Port Drying Chamber #7522800
12-Port Drying Chamber
  • Provides a convenient means to attach numerous samples to a freeze dry system
  • For use with FreeZone 1L, 2.5L, 6L 12L, 18L and FreeZone Plus 4.5L
  • Dimensions: 8 diameter x 9.75H in. (203 x 248 mm)
  • Material: 304 stainless steel, 1/2" thick acrylic lid with neoprene gasket
  • Includes: 12 neoprene valves with molded plastic knobs that accommodate both 1/2" (13 mm) and 3/4" (19 mm) adapters for connection of flasks
  • Shipping weight: 11 lbs. (5 kg)

Labconco Freeze Dry system
Clear Drying Chamber #7443500

Clear Drying Chamber with Valves, Small or Large
The acrylic chamber provides visibility during the bulk drying process and accommodates connection of freeze dry glassware to eight valves.

Small and Large Chambers Include:

  • Clear acrylic cylinder; anodized aluminum lid
  • 8 neoprene valves with molded plastic knobs for use with both 1/2" (13 mm) and 3/4" (19 mm) adapters
  • Clear acrylic attachment port lid with 3" diameter opening and neoprene jacket

Small for use with FreeZone 1L, 2.5L, 4.5L, 6L 12L, 18L and FreeZone 4.5L

  • Dimensions: 14.62 diameter x 12.2H in. (309.88 x 309)
  • Cylinder Dimensions: 9.25 diameter x 9.75H in. (234.95 x 247.65 mm)
  • Accommodates: Product Shelves 7442100; Heated Product Shelves 7509200, 7509201, 7418000 and 7418001

Large for use with FreeZone 6L, 12L, 18L

  • Dimensions: 17.34 diameter X 15H in. (440.43 x 381 mm)
  • Cylinder Dimensions: 12 diameter x 12.6H in. (304.8 x 320.04 mm)
  • Accommodates: Product Shelves 7442100 and 7441700; Heated Product Shelves 7418000, 7418001, 7509400, 7509401, 7509200 and 7509201

7442900
Small and Large Clear Chamber w/out Valves
#7442900

Clear Chamber w/out Valves, Small or Large
Acrylic chamber provides visibility into chamber during bulk drying process.

Small and Large Chambers Include:

  • Clear acrylic lid with neoprene gasket
  • Vacuum release valves
  • Pass-through for electrical transformer cords
  • Clear acrylic attachment port lid with 3" diameter opening and neoprene gasket

Small for use with FreeZone 1L, 2.5L, 4.5L, 6L 12L, 18L and FreeZone 4.5L

  • Dimensions: 10.3 diameter x 13.1H in. (261.62 x 332.74 mm)
  • Cylinder Dimensions: 9.25 diameter x 9.75H in. (234.95 x 247.65 mm)
  • Accommodates: Product Shelves 7442100; Heated Product Shelves 7509200, 7509201, 7418000 and 7418001

Large for use with FreeZone 6L, 12L, 18L

  • Dimensions: 13.6 diameter x 16.3H in. (345.44 x 414.02 mm)
  • Cylinder Dimensions: 12 diameter x 12.6H in. (304.8 x 320.04 mm)
Accommodates: Product Shelves 7442100 and 7441700; Heated Product Shelves 7418000, 7418001, 7509400, 7509401, 7509200 and 7509201
Drying Chambers
Labconco Part # Dimensions
in. (mm)
Compatible
with FreeZone
Cat. # Price
7522800 12-Port Drying Chamber 1L, 2.5L, 6L 12L, 18L, Plus 4.5L 3647-84 $ 2,336
7443500 Small Clear Drying Chamber with Valves 1L, 2.5L, 4.5L, 6L 12L, 18L, Plus 4.5L 3647-85 $ 1,661
7442900 Small Clear Chamber w/out Valves 1L, 2.5L, 4.5L, 6L 12L, 18L, Plus 4.5L 3648-40 $ 1,193
7444000 Large Clear Chamber with Valves 6L, 12L, 18L 3648-41 $ 2,312
7867000 Large Clear Chamber w/out Valves 6L, 12L, 18L 3648-42 $ 1,654
Top of Page

Manifolds
4-port manifold 24-port two-tier manifold
4-Port Manifold
Includes: 4 neoprene valves with molded plastic knobs for1/2" (13 mm) and3/4" (19mm) adapters for connection of flasks
24-Port Two-Tier Manifold
Includes 24 neoprene valves with molded plastic knobs for 1/2" (13 mm) and3/4" (19mm) adapters for connection of flasks
20-port freezone 20-port manifold
20-Port Manifold
Includes: 20 neoprene valves with molded plastic knobs for 1/2" (13 mm) and 3/4" (19mm) adapters
20-Port Manifold w/ Support Shelves
Includes: 20 neoprene valves with molded plastic knobs that accommodate 1/2" (13 mm) and 3/4" (19mm) adapters for connection of flasks; two adjustable aluminum support shelves with stainless steel roods
Manifolds
Labconco
Part #
Description
Dimensions
W" x D" x H" (mm)
Compatible
with FreeZone
Cat. # Price
7522200 4-Port Manifold 8.7 x 8.7 x 9
(221 x 221 x 229)
1L, 2.5L, 4.5L, Plus 4.5L 3647-86 $ 566
7522300 20 Port Manifold 19W x 8.7D x 11H
(482.6 x 220.98 x 279.4)
1L, 2.5L, 4.5L, 6L, 12L and 18L, Plus 4.5L 3648-50 $ 2,117
7548000 24-Port Two-Tier Manifold 26.5W x 10.6D x 20H
(673.1 x 269.24 x 508)
6L, 12L, 18L 3648-52 $ 2,168
7522500 20-Port Manifold
w/ Support Shelves
29.6W x 24D x 10H
(751.84 x 609.6 x 254)
6L, 12L, 18L 3648-51 $ 2,293
Top of Page

Freeze Dry Glassware
Labconco Freeze-drying flask
Fast-Freeze® Flasks
Fast-Freeze® Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze®Flask consists of a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available in borosilicate glass or stainless steel. Fast-Freeze® Flasks and Adapters are compatible with any brand freeze dryer that has .5" (13 mm) or .75" (19 mm) diameter valve ports.
Fast-Freeze® Flasks
Labconco # Dimensions W" x D" x H"(mm) Volume mL Cat. # Price
7540000 34 diameter x 76 height 40
3647-87 $ 70
7540200 34 diameter x 115 height 80 3647-88 $ 98
7540300 59.2 diameter x 68 height 120
3647-89 $ 135
7540400 59.2 diameter x 85 height 150
3647-90 $ 139
7540600 59.2 diameter x 145 height 300
3647-91 $ 164
7540800 90.2 diameter x 135 height 600 3647-92 $ 205
7540900 90.2 diameter x 190 height 900
3647-93 $ 222
7541000 90.2 diameter x 240 height 1200 3647-94 $ 250
7541200 90.2 diameter x 380 height 2000
3647-95 $ 293

Product Shelves
product shleves

Product Shelves for FreeZone Chambers

Designed to fit inside Drying Chambers, these three-tier product shelves are made of aluminum and are available in standard and heated models. Units accommodate bulk samples, microtiter plates, serum bottles or vials.

Includes:

  • 3 aluminum shelves with a 1/4" rim
  • 3 stainless steel support rods
  • 9 clips for shelf height adjustment
  • 3 rubber feet
  • *Low voltage transformer with variable heat control to +40°C (+104° F) (for 7418000 only)
Product Shelves
Labconco
Part #
Size Dimensions
H x Diameter
in. (mm)
Compatible
with
FreeZone
Fits inside Chamber Cat. # Price
7442100 Small 9.4 x 6.25
(238.76 x 158.75)
1L and 2.5L 12-Port Drying Chamber (7522800)
16-Port Drying Chamber (7522900)
Large Clear Chamber (7867000)
Large Clear Chamber with Valves (7444000)
Small Clear Chamber (7442900)
Small Clear Chamber with Valves (7443500)
3648-45 $ 562
7418000* Medium
Heated
(Shown)
9.4 x 7.25
(238.76 x 184.15)
1L and 2L. 6L,
12L and 18L
16-Port Drying Chamber (7522900)
Large Clear Chamber (7867000)
Large Clear Chamber with Valves (7444000)
Small Clear Chamber (7442900)
Small Clear Chamber with Valves (7443500)
3648-46 $ 2,597
7441700 Large 12.2 x 9.9
(309.88 x 251.46)
6L, 12L and 18L ;16-Port Drying Chamber (7522900)
Large Clear Chamber (7867000)
Large Clear Chamber with Valves (7444000)
3648-47 $ 625

Adapters
Borosilicate glass or stainless steel adapters are available either straight or in a 45 degree angle. Fast-Freeze Flasks and Adapters are compatible with any freeze dryer that has .5" (13 mm) or .75" (19 mm) diameter valve ports.
Adapters
  Straight Adaptor 45° Bend Adaptor
Diameter Labconco # Cat. # Price Labconco # Cat. # Price
Borosilicate Glass
0.5" (13 mm) flask top to 0.5" (13 mm) valve 7545000 3647-97 $ 10 7545600 3647-97-45 $ 17
0.25" (6 mm) flask top to 0.75" (19 mm) valve 7545200 3647-98 $ 13 7545800 3647-98-45 $ 17
0.5" (13 m) flask top to 0.75" (19 mm) valve 7545400 3647-99 $ 18 7546000 3647-99-45 $ 28
0.5" (13 mm) flask top to 0.5" (13 mm) valve 7545400 3647-99 $ 18 7546000 3647-99-45 $ 28
Stainless Steel
0.5" (13 mm) flask top to 0.5" (13 mm) valve 7547000 3647-97-SS $ 25 7547400 3647-97-SS45 $ 32
0.75" (19 mm) flask top to 0.75" (19 mm) valve 7547200 3647-98-SS $ 25 7547600 3647-98-SS45 $ 32
Top of Page
Click to leave a message. 24-hour sales and tech phone support, M - F
Go to...
Go To
TerraUniversal.com