FREE CONSULTATION714-578-6016
  1. Home
  2. Dispersers
  3. T 10 basic ULTRA-TURRAX

T 10 basic ULTRA-TURRAX® Disperser
by IKA

RV 10 Basic V and RV 10Basic V-C
Economical unit ideal for small scale dispersing
Compact, lightweight and economical, the T 10 basic ULTRA-TURRAX is a small scale dispersing system ideal for use in analytical research. The unit mixes, homogenizes and emulsifies a wide range of materials with varied miscibility. Stainless steel and plastic disposable elements are available for contamination-free PCR processes. Designed specifically for scalable applications, these units streamline the process by eliminating the need for larger scale experiments until your protocol is perfected.
  • Volume range: 0.5 to 100 ml (H2O)
  • Speed range: 8000 to 30000 rpm
  • Quick-connect & release coupling of dispersing elements for fast & easy tool change-out
  • Infinitely variable speed control
  • High performance drive for speed stability
  • Small sample dispersing system for analytical research
  • Ergonomic, lightweight unit ideal for manual operation
  • Mixes and disperses products with a wide range of miscibility
  • Accepts Stainless steel and Plastic disposable dispersing elements (sold separately)
  • Use as hand-held or standalone operation; quiet operation
  • Protects motors against overload
  • 2012 winner of the Red Dot design award
  • For use in labs, pharmacies and educational institutions
  • Two-year manufacturer warranty, plus additional One-Year Warranty after registration
Ordering Information
IKA Part # Description Cat. # Price
3737001 T 10 basic ULTRA-TURRAX® Dispersion Unit, 120V 6924-71 $ 1,197
Dispersing elements sold separately.
Rotor-Stator Principle
The rotor-stator principle provides better dispersion of materials. The dispersal unit is designed with a rotor and stator in very close proximity in order to produce an extremely strong shear force that expels samples being processed through the slots of the rotor-stator.
Top of Page

Specifications for T 10 basic ULTRA-TURRAX® Dispersion Unit

Motor rating input/output 125W/75W
Volume range min/max. 0.5 to 100 ml (H2O)
Viscosity maximum
5,000 mPas
Speed range 8,000-30,000 rpm
Speed control Stepless
Speed display Speed Control Table for T 10 Dispersion Unit
Adjusting wheel scale 1 2 3 4 5 6
No-load speed [RPM]
8,000
9500
11500
14,500
20,500
30,000
Speed in 5 ml water [RPM]
7,900 9,400 11,400 14,450 20,450 29,900
 
Calculations in speed table based on a dispersion of 5 ml water using dispersing tool S 10 N – 5G. Speeds will vary depending on dispersing tool used. Speed is dependent on the dispersion element used, viscosity of the medium, and its volume
Speed variation on load change <6%
Noise without element 65 dB(A)
Extension arm diameter 8 mm
Extension arm length
100 mm
Process type batch
Permitted ON time   10 minutes
Power OFF time after on 5 minutes
Overload/blocking protection Locking bimetallic switch; temperature and power sensitivity
Dimensions (W x D x H)  2.20 x 7.01 x 2.59  in. (56 x 178 x 66  mm)
Clamp arm dimension (Ø x L) 0.315 x 3.94 in. (8 x 100 mm)
Weight 1.10 lbs. [0.5 kg]
Permissible ambient temperature 5°C to 40°C
Permissible relative humidity 80%
Protection class per DIN EN 60529  IP 30
Contamination level 2
Protection class II
Overvoltage category II
Operation at a terrestrial altitude Maximum 2000 m above sea level
Voltage 115V; 230V also available; contact us for details
Frequency 50/60 Hz
Power input/output 125W/75W
Top of Page

Dispersing Elements and Accessories for T-10 Disperser


Stainless steel and disposable (synthetic) dispersing elements are available for use with
T 10 basic ULTRA-TURRAX® Dispersers

0.5-5 ml
IKA
Part #
Description Cat. # Price
3304000 S10 N-5 G Dispersing element
6924-72 $ 1,534

Specifications:

    • Volumes from 0.5-5 ml
    • Material: stainless steel
    • Stator diameter: 5 mm
    • Rotor diameter: 3.8 mm
    • Shaft length: 92 mm
    • Gap: 0.1 mm
    • Circumferential speed max: 6 m/s


1-50 ml
IKA
Part #
Description Cat. # Price
3305500 S 10 N-8 G Dispersing element
6924-73 $ 1,426

Specifications:
    • Volumes from 1-50 ml
    • Material: stainless steel
    • Stator diameter: 8 mm
    • Rotor diameter: 6.1 mm
    • Shaft length: 115 mm
    • Gap: 0.25 mm
    • Circumferential speed max: 9.6 m/s


1-100 ml
IKA
Part #
Description Cat. # Price
3370100 S 10 N-10 G Dispersing element
6924-74 $ 1,426

Specifications:

    • Volumes from 1-100 ml
    • Material: stainless steel
    • Stator diameter: 10 mm
    • Rotor diameter: 7.6 mm
    • Shaft length: 115 mm
    • Gap: 0.2 mm
    • Circumferential speed max: 11.9 m/s


See T10 basic ULTRA-TURRAX® Dispersion Unit, 120V
Compare Dispersing Elements

Saw Tooth, Stainless Steel
    • For use with tissue and other fibrous materials
    • Saw tooth design creates a cutting and tearing action for shredding fibrous materials


1-50 ml
IKA
Part #
Description Cat. # Price
4446500 S10 N-8 G ST Saw tooth dispersing element
6924-75 $ 1,522

Specifications:
    • Volumes from 1-50 ml
    • Material: stainless steel
    • Stator diameter: 8 mm
    • Rotor diameter: 6.1 mm
    • Shaft length: 115 mm
    • Gap: 0.25 mm
    • Circumferential speed max: 9.6 m/s


1-100 ml
IKA
Part #
Description Cat. # Price
4446700 S 10 N-10 G ST Saw tooth dispersing element
6924-76 $ 1,522
Specifications:
    • Volumes from 1-100 ml
    • Material: stainless steel
    • Stator diameter: 10 mm
    • Rotor diameter: 7.6 mm
    • Shaft length: 115 mm
    • Gap: 0.2 mm
    • Circumferential speed max: 11.9 m/s

Top of Page

Disposable, Synthetic Shaft Dispersing Elements for T-10 Disperser


• Single use dispersing element
• Ideal for DNA applications and contamination free PCR analysis
• Does not require cleaning


1-20 ml
IKA
Part #
Description Cat. # Price
0020002076 S 10 D-7 G-KS-65 Plastic dispersing element (24 pcs)
6924-77 $ 690

Specifications:

    • Volumes from 1-20 ml
    • Material: Polycarbonate (PC), Polysulfon (PSU)
    • Stator diameter: 7 mm
    • Rotor diameter: 4.8 mm
    • Shaft length: 65mm
    • Gap: 0.3 mm
    • Circumferential speed max: 7.5 m/s


1-40 ml
IKA
Part #
Description Cat. # Price
0020002075

S 10 D-7 G-KS-110 Plastic dispersing element (24 pcs)

6924-78 $ 808

Specifications:

    • Volumes from 1-40ml
    • Material: Polycarbonate (PC), Polysulfon (PSU)
    • Stator diameter: 7mm
    • Rotor diameter: 4.8 mm
    • Shaft length: 110mm
    • Gap: 0.3 mm
    • Circumferential speed max: 7.5 m/s

Plate Stands, Clamps and Tubes for T-10 Disperser

Top of Page


Shown with Dispersal Unit and beakers (sold separately)
IKA
Part #
Description Cat. # Price
3160000 R 1825 Plate Stand, 560 mm height 6924-84 $ 166

Specifications:

    • Height: 22.04 in. (560 mm)
    • For use with IKA Dispersal units
    • With slip resistant foil
    • Diameter of support rod: 0.62 in. (16 mm)
    • Max. load: 11 lbs. (5 kg)
    • Dimensions (W x D): 7.87 x 12.44in. (200 x 316 mm)
IKA
Part #
Description Cat. # Price
3160100 R 1826 Plate Stand, 800 mm height 6924-85 $ 187

Specifications:
    • Height: 31.49 in. (800 mm)
    • For use with IKA Dispersal units
    • With slip resistant foil
    • Diameter of support rod: 0.62 in. (16 mm)
    • Max. load: 11 lbs. (5 kg)
    • Dimensions (W x D): 7.87 x 12.44 in. (200 x 316 mm)
IKA
Part #
Description Cat. # Price
3160200 R 1827 Plate Stand, 1000 mm height 6924-86 $ 195

Specifications:
    • Height: 39.37 in. (1000 mm)
    • For use with IKA Dispersal units
    • With slip resistant foil
    • Diameter of support rod: 0.62 in. (16 mm)
    • Max. load: 11 lbs. (5 kg)
    • Dimensions (W x D): 7.87 x 12.44 in. (200 x 316 mm)


R 182 Boss head clamp
IKA
Part #
Description Cat. # Price
2657700 R 182 Boss head clamp 6924-87 $ 32

Specifications:
    • For affixing dispersion unit to plate stand
    • Material: cast aluminum
    • Clamping range – stand: 6 to 16 mm
    • Clamping range – extension arm: 6 to 16 mm



RH 3 Strap Clamp
IKA
Part #
Description Cat. # Price
3008600 RH 3 Strap Clamp 6924-88 $ 55

Specifications:
    • Secures vessel against wall during dispersion
    • Used for synchronized rotation during dispersion or mixing

See T10 Basic ULTRA-TURRAX® Dispersion Unit, 120V
See Dispersing Elements

Top of Page

Stainless Steel Dispersing Element Specifications
Stainless Steel
Disposable Plastic
Parameter
S 18 N - 10 G
S 18 N - 19 G
S 18 D - 10 G - KS
S 18 D - 14 G - KS
Volume range (H2O)
1 to 100 ml
10 to 1500 ml
10 to 100 ml
10 to 500 ml
Stator diameter
10 mm
19 mm
10 mm
14 mm
Rotor diameter
7.5 mm
12.7 mm
6.75 mm
9.5 mm
Gap between rotor and stator
0.35 mm
0.4 mm
0. 25 mm
0.35 mm
Circumferential speed
9.8 m/s
16.6 m/s
8.5 m/s
12 m/s
Immersion depth range
25 to 70 mm
35 to 170 mm
15 to 85 mm
15 to 85 mm
Shaft length
108 mm
204 mm
150 mm
150 mm
Material in contact with medium
PTFE, AISI 316L
Polycarbonate (PC),
Polyetheretherketon (PEEK)
pH range
2 to 13
2 to 13
--
--
Suitable for solvents
yes
yes
--
--
Suitable for abrasive substances
yes
yes
--
--
Working temperature max
180°C
180°C
100°C
100°C
Sterilization methods
all methods
all methods
Yes, autoclavable
Yes, autoclavable
Ultimate fineness, suspensions min.
10 µm
10 µm
10 µm
10 µm
Ultimate fineness, suspensions max.
50 µm
50 µm
50 µm
50 µm
Ultimate fineness, emulsions min
1 µm
1 µm
5 µm
5 µm
Ultimate fineness, emulsions max.
10 µm
10 µm
20 µm
20 µm
Legend for IKA Part Numbers
For dispersing instrument
Dispersing element Shaft / Agitator shaft
With seal or bearing type
Generator or element
With outer Diameter (mm)
Degree of fineness achieved
T 18 digital
S 18
N
--
10/19
G
N = PTFE bearing
G = Coarse
Related Products
Dispersers
PCR Work Stations and Equipment
Click to leave a message. 24-hour sales and tech phone support, M - F
Go to...
Go To
TerraUniversal.com