Terra Universal

Ductless exhaust hoods contain an integral blower and filter stacks, carbon for vapors, HEPA/ULPA for particles, that allow indoor release of exhaust air. Use when ducting to a remote blower or in-house exhaust system is not practical and fumes are annoyances, not health threats; not intended for use with biohazards.

Cleanroom compliant ovens feature a stainless steel interior and HEPA filtration.

Wall-mount, plastic, 1-3 compartments for boxed gloves

Wall-mount BioSafe® stainless steel or plastic, 1-5 bins, with/without catch basin

ULPA-filtered dryer eliminates particles, including microbes, from heated air stream; wall-hugging, sloping stainless steel housing minimize particle build-ups

Plastic; the material provides a sustainable, durable, long lasting design and construction. (see product details to see specific type of plastic and additonal material details)

Stainless Steel is corrosion resistant, durable, and easy to clean. (see product details for specific Stainless Steel Grade)

Doors can be removed and autoclaved for complete sterilization. Leakage-rated by UL; built with unique gasket and lift latch assembly to control leakage of air and cross contamination between rooms.

Fire-rated door carries the UL-B label for 90-minute fire exposure (suitable for 2-hour wall rating).

Pass-through doors with sealing integrity are leakage-rated by UL; built with unique gasket and lift latch assembly to control leakage of air and cross contamination between rooms. Ideal for cleanrooms and USP <797/800> pharmaceutical applications.

To determine if you need a left-hand or right-hand frame, stand on the side of the door where it swings away from you. If it opens to the left, it’s a left-hand door; if it opens to the right, it’s a right-hand door.

To determine if you need a left-hand or right-hand frame, stand on the side of the door where it swings away from you. If it opens to the left, it’s a left-hand door; if it opens to the right, it’s a right-hand door.

ISO-5 and cleaner carts suitable for cleanroom use

Multi-stage HEPA and ULPA filtered vacuum cleaners remove dust and particle contaminants before returning air; select models contain autoclavable parts for aseptic, biological applications or ESD resistant materials for static sensitive applications

Ideal for strict sterilizing protocol. Double wall design conceals mechanical interlock, providing seamless interior & completely eliminating germ/particle traps

Opaque (white) polypropylene resists most acids, alkalis, and solvents

Static Dissipative PVC: Safely conducts surface charges to ground, protects against particle aggregation, and has broad chemical resistance for easy sterilization.

More economical than stainless steel; offers excellent corrosion and chemical resistance.

Durable, resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.

Aseptic, low bio-burden, withstands high temperature and humidity fluctuation; low carbon rating indicates reduced percentage for enhanced corrosion resistance

Economical Acrylic provides excellent clarity and provides high tensile strength, it is damaged by frequent contact with alcohol and other common cleaning agents

Static Dissipative PVC: Safely conducts surface charges to ground, protects against particle aggregation, and has broad chemical resistance for easy sterilization.

Durable; resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.

Directs a uniform, clean stream of air from the back of the hood toward the operator. Minimizes turbulence from air striking the work surfaces. Open front allows unrestricted air flow and unrestricted access to the work surface.

304 stainless steel is durable and chemical resistant, making it the preferred material wherever frequent cleaning and sterilization are required.

Cleanroom-grade laminate is sealed along all edges to prevent particle release

Corian is a non-porous, stain-resistant top material that offers excellent chemical resistance and is easy to clean and disinfect

Combines the chemical- and heat-resistive properties of plastic laminate with a controlled path to ground for dissipation of static charge without voltage suppression ambiguity. This laminate has a micro-thin layer of aluminum oxide (Mohs hardness of 9; diamond = 10) integrated directly into its surface, creating an extremely hard protective layer, which provides long-term resistance to surface abrasion. This material has also been specifically tested for particle trapping (see test results below.) Each sheet used in fabrication is individually certified to meet the values set forth at below.

Polypropylene tops provide superior resistance to chemicals, particularly acids

Rated 99.999% efficient @ particles ≥0.12 µm in diameter; uses FDA-grade silicone sealant.

Rated 99.99% efficient @ particles ≥0.3 µm in diameter; uses FDA-grade silicone sealant.

AC fans provide low cost, reliable operation – ideal for most laminar flow hoods and small cleanrooms; unique WhisperFlow FFU baffling system ensures quiet operation

Automated system controls nitrogen flow rates to maintain RH set point across entire cabinet. Built-in dilution fan efficiently distributes inert gas to reduce recovery time after door is opened and eliminates moisture plumes or collection areas that degrade sensitive components.

These BioSafe® models are available in chemical resistant materials for cleaning with alcohol and other biocides and feature open-slot or hinged compartments for easy cleaning and minimal particle build-ups

Designed and manufactured by Terra Universal in the USA of domestic and imported materials.

Horizontal Laminar Flow (HLF) stations provide horizontal airflow across the integrated, stainless steel work surface.

Eliminates door swing clearance - ideal for tight spaces.

Upgrades a mechanical double-wall pass-through to a Smart pass-through with electronic interlock and status lights (required for other electronic add-on options).

UV-C Sanitizing Module with safety control neutralizes microbes on samples inside the chamber.

Recessed LED lights are longer-lasting, produce less heat.

Remote monitor/control of pass-through access modules: fingerprint reader, keycard reader, iris reader and entry panel. Includes remote access to event log that displays who opened doors and when.

Reduces cleanrom contamination by dislodging and capturing particles on sample surfaces.

Push-button unit integrated into the pass-through housing allwos convenient through-wall communication.

Safe, noninvasive, non-contact iris scanner prevents unauthorized pass-through operation. Datalogging system generates access history.

Compact unit reads HID cards in formats up to 85 bits to prevent unauthorized access. Datalogging system generates access history.

4G technology and 500 dpi optical sensor guarantees fast, reliable biometric security to prevent unauthorized access. Datalogging system generates access history.

High-definition camera provides a video record of Smart Pass-Through use.

Duplex outlets available for powering equpiment inside the pass-through chamber.

Scans chamber interior for presence of transfer item and issues an alert when load is detected.

LCD message panel provides alerts on door operation and optional add-on features, such as temperature or exhaust air speed.

Displays on message panel the speed of air ventilated through optional exhaust flange to ensure safe fume removal.

The ProxPad Keyless Door Entry Panel combines a poximity card and PIN reader for enhanced access security.

Create convenient 90° angle corner configurations for pass-through placement in tight cleanroom corners.

Automatic door allows hands-free operation via a motion sensor to simplify door operaiton and prevent contamination of gloves.

Recirculating HEPA filtration system scrubs air inside the chamber to ISO 5 cleanliness level.

Positive pressure WhisperFlow™ Fan-Filter Units provide a uniform flow of microfiltered air to meet cleanliness standards down to Class 10 (ISO 4).

Continuous-Seam stainless steel welds with radius corners provide smooth interior for easy cleaning/disinfection

Ideal for frequent use applications and maximum service life. Unique non-outgassing rubber “e” shaped gasket combined with robust door latches and rigid stainless steel construction provides a tight seal and maximizes service life.