Whether lab technicians like it or not, cleanrooms are exposed to contaminants. Adulteration can occur from personnel, equipment, or even incorrect decontamination processes. Since many cleaning methods exist, it’s important to select one that’s best for your application; an careless technique may redeposit contaminants onto surfaces rather than take them away. Understanding particle-to-surface bonding (electrical, physical, or chemical) is one of the first steps to optimal cleaning efficiency. Keep reading for more tips that ensure your cleanroom remains clean.
Basic Types of Cleaning
“Wet cleaning” removes contamination with the use of a cleaning fluid. In some cases, wiping will move particles, but fail to remove them. Therefore, wet cleaning is typically implemented when wiping is not enough to overcome the particle adhesion. Cleaning solutions include a number of chemical choices; based on the surface material and whether disinfection or sterilization is the goal will determine the type of chemical(s) required.
“Dry transfer” is the polishing and/or wiping of a surface using a collective or absorbent material. Since the point of cleaning is to sanitize, reducing the possibility for recontamination is essential. Cloths and wipes should consist of durable materials that will not redeposit particles, shed fibers, or easily break apart. Your cleanroom’s ISO class will establish whether knitted polyester or more absorbent cotton twill wipes are necessary.
Wet cleaning and dry transfer can only go so far; for a more rigorous disinfection or sterilization, some cleaning equipment may be better-suited to the task. In cleanrooms requiring an aseptic environment, ultraviolet (UV) irradiation is used to sterilize large areas, rendering pathogens harmless by destroying the microorganisms’ DNA.
Autoclaves sterilize laboratory supplies, equipment components and some liquids by steam-cleaning, using high pressure and heat. The pressurized enclosure raises the temperature of water to above its boiling point so that the steam holds more heat, making the autoclave efficient at killing most microbes.
Vaporized hydrogen peroxide (VHP) bio-decontaminate using a sporicidal solution that is deposited onto surfaces. VHP systems are compatible with sensitive electronics and provide quick and effective neutralization of biological agents and category III and IV pathogens. A VHP unit will disperse vapors in large environments like cleanrooms and laboratories, or small enclosures such as glove boxes; however, hydrogen peroxide vapors are harmful to humans when inhaled, so units should only operate during off-hours to ensure personnel safety.
If surfaces or equipment are sensitive to moisture, non-abrasive dry ice “blasting” can be performed in a nitrogen-rich environment to remove contaminants. High-precision dry ice guns use an intense, pressurized stream of carbon dioxide (CO2) to dislodge particles. The solid CO2 sublimates, and as a result no chemical residue is left behind; contaminants are carried away by the flowing “ice” air stream.
For submicron particle removal, high-frequency ultrasonic cleaners will handle anything from the most delicate of substrates to the more difficult industrial equipment without causing damage. Sound waves create bubbles in water- or chemical-based liquid solutions, which release “scrubbing” energy when they burst. Add heat for a more powerful cleaning result.
Vacuums are fundamental to cleanroom cleanliness. They use HEPA or ULPA filters to capture and removes particles from the controlled environment. Interchangeable attachments allow personnel to clean flat surfaces and hard-to-reach areas such as corners and crevices. Many are designed for hazardous dry or wet material clean-up with grounding wires and non-sparking motors to prevent explosions from dust or flammable liquids.
Here are a few tips to help maintain the high standards of your cleanroom:
Practicing proper cleaning methods and providing personnel with suitable cleaning supplies will positively influence the quality and results of your cleanroom processes. Check your facility’s standard operating procedures for required cleaning frequency, but also use common sense: if it’s been exposed to contaminants or looks dirty, clean it! For more information about cleanroom sanitizing and decontamination, visit cleaning equipment.